SOLID C distributors are devices designed for the combined spread of dry, preumectated and/or liquid agents in winter.
Technical Specifications:
- carrier system for dry material (CX-sfredel, CT-belt, CL-lant);
- distribution system for dry materials;
- distributor for spreading 2 – 9 m (1 – 6 m liquid spreading);
- spreading frame with a base capacity of 5 t;
- microphonic contact sensor for rsspandire control;
- electronic control unit EPOS 10;
- linear motor for adjusting the scattering mode;
Sararita SOLID C
Technical solutions allow these combinations of spread:
- spreading only dry materials to a width of 2-9 m (optional 3-12 m);
- spreading of preset materials with different percentages of wet agent in total mass (FS 30, FS 50, FS 70), 2 –9 m (optional 3-12 m);
- liquid spreading (chloride solution) (FS 100) using the dispenser at a width of 1 to 6 m (optional 2 to 8 m);
- spreading the liquid by means of a nozzle ramp, which covers 3 x 3.75 m lanes of road, or 12 m (6 m left + 6 m right);
- in 1 m increments.
Sararita TRP
Technical Specifications:
- spreading housing with a system for extracting the spreading material (snail transporter);
- distributor for 1-6 m spread;
- the safety net above the drill;
- manual adjustment mechanism of the spreading pattern;
- hydraulic system for the drive of the distributor;
- electrical signalling installations in accordance with traffic safety regulations;
- electronic control unit EPOS 1;
- set of hydraulic hoses with fast couplings for connection to the hydraulic system.
Technical Specifications:
- spreading frame with a height-adjustable foot system with a capacity of 5 t;
- pumps for liquid spraying with filters and fittings;
- proportional hydraulic valve for pump operation control;
- connector for filling with spreading liquid with the permissible capacity of 60,000 liters / h;
- minimum liquid level sensor (provides an auditory and light signal to the operator when the tanks are empty);
- reclining ladder with gas springs and a ramp on which the nozzles are located;
- EPOS 10 electronic control unit (allows to change the spread width for the left or right side separately in 1m or 3.75m strips).
Sararita LIQUID
Sararita JUNIOR
Technical Specifications:
- container for solid materials;
- place the payment above the container 50×50 mm, hot galvanized;
- solid material conveyor system (sfredel);
- distribution system for dry materials;
- rotary spreading dispenser, 1-6 m;
- adjustable height legs with lifting jacks, with a capacity of 2 t;
- rotate on the face for easier fixing;
- electronic control unit EPOS 1;
- manual adjustment mechanism of the spreading model.
The dosing and distribution of the spreading material is done through a tab pushing plates on the rubber bottom of the dispenser. The change in the amount of spreading material is made by modifying the arc pressure towards the mechanical bottom. Turning on and off the device is done by a mechanism on the motor wheels.
Technical Specifications:
- container for spreading material with removal and distribution mechanism;
- a system that regulates the amount of spread;
- sieve above the material container;
- signaling of electro-installations in accordance with legal regulations;
- inner tube wheel and driving mechanism;
- Ø50 mm traction bar or traction shaft.
Sararita MINI
Sararita RAS
Technical Specifications:
- distributor towed RAS 2400 (container capacity of 1 m3) or RAS 2800 (dry material container capacity of 1,2 m3);
- protective net in the spreading container;
- chains for connecting to the walls of a truck;
- chains for rear-action control (prevents the collision of the distributor and the truck);
- towing eye per dispenser, height adjustable (600-900 mm), with an eye diameter of 42 mm;
- light-signalling in accordance with the applicable regulations;
- manual spread deactivation system (a button with mechanism activation).
MMS is a device for the preparation of salt solution (CaCl2, NaCl, MgCl2, urea) used for wet or liquid spreading on the roads. The device's tank is made of special corrosion, UV radiation and temperature-resistant plastic. The mixing process is carried out by manually controlling the density (concentration) of the solution. Filling the distributor tanks with solution is carried out through a 6/4" standard hose connector.
BASIC DEVICE:
- casting basket;
- tank for the preparation of the solution;
- full-installation pump unit;
- electronic control unit;
- fixing the fire hose 6/4 ", used to connect with the dispenser using a separate hose;
- 10 m 380 V / 16 A electric cable;
- cable to connect the mixer control unit with the dispenser;
- istometer that measures the concentration of salts.
Sararita MMS
Technical Specifications:
- the lower part of the tank has two levels to allow the solution to flow into the lower level, allowing the pump to extract all the solution from the tank;
- integrated pump with a capacity of 30.000 l./h;
- electric cable for automatic closing of the mixer pump when filling the distributor, included in the standard;
- automatic closing of the mixer pump by means of the level switch (maximum sensor) incorporated in the dispenser tank, regardless of whether it is switched on;
- level switch (minimum sensor) to automatically stop the pump when the liquid level drops below the minimum;
- the level indicator for visual control of the amount of solution in the malaxor;
- equipment (the dispenser must be equipped with a level outlet and switch to stop the mixer when the dispenser tanks are full);
- the option to manually start mixing the solution in the device and in its additional tanks;
- option to fill the distributor's tanks by opening the upper.
Sararita LIQUID S
Technical Specifications:
- transport frame;
- pump liquid agent with filter and fittings (80 l / min), hydraulic drive;
- proportionally hydraulic valve for pump drive;
- fixation for filling with liquid spreading agent, allowable capacity up to 25m3 / h;
- fullness sensor of the spreading tank (closes the pump of the liquid agent mixer);
- minimum liquid level sensor (provides an auditory and light signal to the operator when the tanks are empty);
- electronic control unit EPOS 5 (fixed width of spread).
Technical Specifications:
- container for solid materials;
- place the payment above the container 50×50 mm, hot galvanized;
- solid material conveyor system (sfredel);
- distribution system for dry materials;
- distributor for 1-6 m spread;
- adjustable height legs with lifting jacks, with a capacity of 2 t;
- electronic control unit EPOS 5.
Sararita SOLID XG
Do you want to know more details about sararite?
The teams of specialists within Inoveco are at your disposal for any kind of questions about the products and services in our portfolio. Fill in the contact form below and ask for a personalized offer.